There are 3 alternative for the TAC to consider / choose from. The 3 alternatives differ in the prerequisites a candidate for the LGBMCR has to fulfill and whether the TAC elects an alternate LGBMCR or not.
Overview of the 3 alternatives:
...
LFN
...
General note on the set of eligible candidates: Given that the LGBMCR should represent committers, it seems logical that the LGBMCR is a committer.
Deltas in the 3 alternatives are highlighted in "red".
Alternative 1: LFN Governing Board Member Committers Representative - "Serve-at-least 2"
Role:
- The role of the LFN Governing Board Member Committers Representative (LGBMCR) is to represent the committers and contributors to LFN projects at the LFN Governing board. The expectation of the LGBMCR is to attend all LFN Governing board meetings (and any appropriate ancillary meetings), gather input from the committer community for issues raised at the board level, and to communicate to the committer community key activities from board.
- LGBMCR is elected for the 1 year. Re-election is possible. There are no term limits.
Eligible candidates:
- Candidates must be actives committer to at least one LFN project. A person is classified as “active committer” if the person has done at least 10 git commits during the last year to a particular LFN project.
- Candidates can self-nominate, or be nominated by other community members. In the latter case, candidates must accept the nomination before the election is conducted.
- Candidate must be an active contributor to at least 2 LFN projects. A person is considered an “active contributor” to a LFN project, if the person is a committer on the project or is eligible to vote for "any" election in that project. Examples of elections in the project: TSC, PTL, etc.
Eligible voters:
- Any person who is an “active contributor” to any LFN project (i.e. LFN TAC-projects as well as any other LFN projects) is eligible to vote for the election. A person is considered an “active contributor” to a LFN project, if the person is a committer on the project or is eligible to vote for "any" election in that project. Examples of elections in the project: TSC, PTL, etc.
Election process:
- The LFN Program Manager responsible for the TAC (LFN PM) – or a representative appointed by the TAC to conduct the LGBMCR election - kicks off the election process, announcing the start of a nomination period via email to all technical-discuss and TSC mailing lists of all LFN project.
- Nomination period (see above) is 2 weeks.
- Once the nomination period is closed, the LFN PM (or the appointed representative), starts the election
- Election uses the Condorcet method. The election period is 2 weeks.
- Once the election period is closed, the LFN PM (or the appointed representative) announces the results via email to the above mentioned mailing lists.
Alternative 2: LFN Governing Board Member Committers Representative - "All committers eligible - Cycle every year"
Role:
- The role of the LFN Governing Board Member Committers Representative (LGBMCR) is to represent the committers and contributors to LFN projects at the LFN Governing board. The expectation of the LGBMCR is to attend all LFN Governing board meetings (and any appropriate ancillary meetings), gather input from the committer community for issues raised at the board level, and to communicate to the committer community key activities from board.
- LGBMCR is elected for the 1 year.Re Re-election is not possible.
Eligible candidates:
- Candidates must be actives committer active committers to at least one LFN project. A person is classified as “active committer” if the person has done at least 10 git commits during the last year to a particular LFN project.
- Candidates can self-nominate, or be nominated by other community members. In the latter case, candidates must accept the nomination before the election is conducted.
- Candidates must be an active committer to a LFN project which differs from the LFN project that the currently servicing LGBMCR is an active committer of.
Eligible voters:
- Any person who is an “active contributor” to any LFN project (i.e. LFN TAC-projects as well as any other LFN projects) is eligible to vote for the election. A person is considered an “active contributor” to a LFN project, if the person is a committer on the project or is eligible to vote for "any" election in that project. Examples of elections in the project: TSC, PTL, etc.
Election process:
- The LFN Program Manager responsible for the TAC (LFN PM) – or a representative appointed by the TAC to conduct the LGBMCR election - kicks off the election process, announcing the start of a nomination period via email to all technical-discuss and TSC mailing lists of all LFN project.
- Nomination period (see above) is 2 weeks.
- Once the nomination period is closed, the LFN PM (or the appointed representative), starts the election
- Election uses the Condorcet method. The election period is 2 weeks.
- Once the election period is closed, the LFN PM (or the appointed representative) announces the results via email to the above mentioned mailing lists.
Alternative 3: LFN Governing Board Member Committers Representative - "Two-in-a-box"
Role:
- The role of the LFN Governing Board Member Committers Representative (LGBMCR) and the alternate-LGBMCR is to represent the committers and contributors to LFN projects at the LFN Governing board. The expectation of the LGBMCR and alternate-LGBMCR is to attend all LFN Governing board meetings (and any appropriate ancillary meetings) – Either LGBMCR or alternate-LGBMCR but not both attend the LFN Governing board. LGBMCR and alternate-LGBMCR work together and ensure that each of them attends approx. 50% of the GB meetings. They should also gather input from the committer community for issues raised at the board level, and communicate to the committer community key activities from board.
- LGBMCR and the alternate-LGBMCR are elected for the 1 year. Re-election is possible. There are no term limits.
- LGBMCR and alternate-LGBMCR must not be active committers to of the same LFN project.
Eligible candidates:
- Candidates must be actives committer to at least one LFN project. A person is classified as “active committer” if the person has done at least 10 git commits during the last year to a particular LFN project.
- Candidates can self-nominate, or be nominated by other community members. In the latter case, candidates must accept the nomination before the election is conducted.
Eligible voters:
- An "Active Contributor" is defined as anyone that has made a code contribution to any LFN project in the past 12 months.
Election process:
- The LFN Program Manager responsible for the TAC (LFN PM) – or a representative appointed by the TAC to conduct the LGBMCR election - kicks off the election process, announcing the start of a nomination period via email to all technical-discuss and TSC mailing lists of all LFN project.
- Nomination period (see above) is 2 weeks.
- Once the nomination period is closed, the LFN PM (or the appointed representative), starts the election
- Election uses the the Condorcet method method. The election period is 2 weeks. The two top-ranked persons which are not committers of the same LFN projects are elected. The person who wins the election in Condorcet is elected LGBMCR.
- Once the election period is closed, the LFN PM (or the appointed representative) announces submits the results via email nominee to the above mentioned mailing lists.
Alternative 4: LFN Governing Board Member Committers Representative - "All committers eligible - no project constraints"
Role:
- The role of the LFN Governing Board Member Committers Representative (LGBMCR) is to represent the committers and contributors to LFN projects at the LFN Governing board. The expectation of the LGBMCR is to attend all LFN Governing board meetings (and any appropriate ancillary meetings), gather input from the committer community for issues raised at the board level, and to communicate to the committer community key activities from board.
- LGBMCR is elected for the 1 year.
Eligible candidates:
- Candidates must be actives committer to at least one LFN project.
A person is classified as “active committer” if the person has done at least 10 git commits during the last year to a particular LFN project. - Candidates can self-nominate, or be nominated by other community members. In the latter case, candidates must accept the nomination before the election is conducted.
Eligible voters:
- Any person who is an “active contributor” to any LFN project (i.e. LFN TAC-projects as well as any other LFN projects) is eligible to vote for the election.
A person is considered an “active contributor” to a LFN project, if the person is a committer on the project or is eligible to vote for "any" election in that project. Examples of elections in the project: TSC, PTL, etc.
Election process:
- The LFN Program Manager responsible for the TAC (LFN PM) – or a representative appointed by the TAC to conduct the LGBMCR election - kicks off the election process, announcing the start of a nomination period via email to all technical-discuss and TSC mailing lists of all LFN project.
- Nomination period (see above) is 2 weeks.
- Once the nomination period is closed, the LFN PM (or the appointed representative), starts the election
- Election uses the Condorcet method. The election period is 2 weeks.
- Once the election period is closed, the LFN PM (or the appointed representative) announces the results via email to the above mentioned mailing lists.
Alternative 5: LFN Governing Board Member Committers Representative - "All committers eligible - Cycle every year"
Role:
- The role of the LFN Governing Board Member Committers Representative (LGBMCR) is to represent the committers and contributors to LFN projects at the LFN Governing board. The expectation of the LGBMCR is to attend all LFN Governing board meetings (and any appropriate ancillary meetings), gather input from the committer community for issues raised at the board level, and to communicate to the committer community key activities from board.
- LGBMCR is elected for the 1 year. Re-election is not possible.
Eligible candidates:
- Candidates must be actives committer to at least one LFN project.
A person is classified as “active committer” if the person has done at least 10 git commits during the last year to a particular LFN project. - Candidates can self-nominate, or be nominated by other community members. In the latter case, candidates must accept the nomination before the election is conducted.
- Candidates must be an active committer to a LFN project which differs from the LFN project that the currently servicing LGBMCR is an active committer of.
Eligible voters:
- Any person who is an “active contributor” to any LFN project (i.e. LFN TAC-projects as well as any other LFN projects) is eligible to vote for the election.
A person is considered an “active contributor” to a LFN project, if the person is a committer on the project or is eligible to vote for "any" election in that project. Examples of elections in the project: TSC, PTL, etc.
Election process:
- The LFN Program Manager responsible for the TAC (LFN PM) – or a representative appointed by the TAC to conduct the LGBMCR election - kicks off the election process, announcing the start of a nomination period via email to all technical-discuss and TSC mailing lists of all LFN project.
- Nomination period (see above) is 2 weeks.
- Once the nomination period is closed, the LFN PM (or the appointed representative), starts the election
- Election uses the Condorcet method. The election period is 2 weeks.
- Once the election period is closed, the LFN PM (or the appointed representative) announces the results LFN GB for approval. Once approved, the LGBMCR is announced via email to the above mentioned mailing lists.
...